SMART 3000 Technical Specifications | peparab.com
 
PEParab

     PEPARAB awarded a contract from Oil pipeline Co. for modernize It's ABB Control System by using PEPARAB Smart System at Suez and Mustorod Sites….. PEPARAB Supply it's Smart IO and Smart II successfully to Marine Jet Power (MJP) Sweden since year 2011….. PEPARAB Participate in Korean Egyptian Nuclear Road Show Even.....

SMART 3000 Technical Specifications

warning: Parameter 2 to gmap_gmap() expected to be a reference, value given in /home/peparab2/public_html/includes/module.inc on line 471.

Products | Smart 3000 Series | Technical Specifications

TECHNICAL SPECIFICATIONS                       

CPU

Model

: Tiger multi tasking computer Module

Frequency

: More than 20MHz

Memory

Flash Memory

: up to 4MB

SRAM

: up to 1MB

EEPROM

: 64 KB (Optional)

I/O

DIN

: up to 16 Opto-isolated digital inputs, 24VDC with green LED indicator for each channel, Filter set to 200HZ (5ms).

DOUT

:  Up to 8 Opto-isolated digital output, Up to 0.5A load per channel, 24VDC with yellow LED indicator for each channel, Max frequency 1KHZ.

AIN

: up to 7 analog channels from 0 to 20 mA with internal Vref, up to 16-bit resolution, Max. Accuracy +/- 4LSB in normal speed and +/- 8LSB in high speed (-20C to +70C), Sampling rate up to 50000 samples/sec., Sampling buffer up to 30KB.

Alarm

: Option Internal 85dB buzzer for alarm output

Interfaces

RS232

: 1 serial interface for downloading and debugging (the second serial interface is option in some models)

USB

: Optional One USB for downloading and debugging

I2C

: Local bus for optional EEPROM

Power

Power Supply:          

Input volt range from 7 to 40 VDC

Normal 12VDC (24VDC version available)

Efficiency 80% @ 12VDC input and 3A load current

Front Panel Functions

LEDs:

Green LED +12V or + 24V Power

Green LED +5V Power

Green LEDs for digital input channels

Yellow LEDs for digital output channels

2 Red LEDs for RS232 as TXD and RXD signals

1 Yellow LED for USB

Key Pad:      

16Keys.

Text LCD

Graphic LCD

Side Panel Functions

PC/RUN mode switch

: select programming mode or running mode

Reset switch

: device reset

Terminal block

: IO signals terminals block

Environmental

Operation Temp.

: 0C to +70C and -40C to +85C (optional)

Storage Temp.

:  -55C to +85C

Humidity

: non condensing 93% at 40 C

General

Weight

: Less than 250g

Dimension

: 90 W x 157 H x 60 D mm

Add. Options

EEPROM (64 KB)

RTC (Real Time Clock)

SD-CARD

Two versions of analog input available ( 0-10 VDC) and ( 0-5 VDC)

 

 

AttachmentSize
SMART3000 Data Sheet.pdf338.91 KB
PEParab Certificates